Eclipse 5
Eclipse 5
- Approximate Shipping Weight: 8.9 lbs. (4.0 kg.) less motor
- Min Fluid Temperature: -40°F (-40°C)
- Fluid pH Range: 0-14
- Approximate Weight: 8.9 lbs. (4.0 kg.) less motor
- Bearing Type: Internal Sleeve
- Magnet: Neodymium Encapsulated Virgin ETFE
- Solution Description: Transfer or Metering (Dosing)
- Turndown Ratio: SEE FLOW CURVES
- Casing Housings: PVDF, Optional Carbon-reinforced ETFE
- Max Speed: 1750 rpm
- Theoretical Displacement: 0.113 US gal/100 rev. (4.3 cc/rev.)
- Drive Shaft Diameter: 0.437"
- Min System Pressure: .1mm Hg (abs)
- Max Allowable Working Pressure: up to 200 psig (14 bar)
- Motors: 1750 RPM, 60 Hz (1450 RPM, 50 Hz)
- Motor Power: 0.5 but is influenced by operating differential pressure and fluid viscosity
- Motor Frame: NEMA: 56C, 143/145TCIEC: 63 to 80 B3/B14 Face
- Seat O-Rings Available: FKM, EPDM, Kalrez®
- Drive Idler Gears: Carbon Reinforced PTFE/External Spur Gear
- Shafts: Alumina Ceramic
- HP Required: 0.5 but is influenced by operating differential pressure and fluid viscosity
- Pump Controls Links: MPCv
- Bearings: Carbon Graphite or Graphite-Impregnated Silicon-Carbide
- Port Size and Type: .38 inch FNPT or ISO 7-1, Optional Kit Thread In, Face Static Seal .5" 150# ANSI Flange, DIN 10/15
- Bearing Lubrication: Process fluid
- Max Differential Pressure: 150 psig (10 bar)
- Product Options: Bearing flush
BROCHURES
Eclipse Brochure
FLOW CURVES
Eclipse Series Flow Curves 02-125
TECH SHEETS
Eclipse 05 Non-metallic Data Sheet
Eclipse Non-metallic Value
Metering with Gear Pumps
IOMS
Eclipse IOM
Features
- All wetted components are completely non-metallic, not lined
- Pump housings and gears are made of engineered composites, magnetically driven, and require no mechanical seals
- Zero leakage, no emissions of hazardous or regulated chemicals
- Fewer parts and material options means simplified ordering and inventory
- Front pull-out design - makes for easy service and maintenance in place
- Pre-defined KOPkits® allow for easy ordering and kitting of all necessary parts to bring the pump back to factory performance
- Engineered composite fluoropolymer provide superior chemical resistance, lighter weight, shorter lead-times
- Pump is bidirectional-can be operated in either direction
- Modular design allows for the pump ports to be mounted in 45° increments (to a full 360°, vertical, horizontal, or any configuration imaginable)