Eclipse HypoPump 125
Eclipse HypoPump 125
- Approximate Shipping Weight: 44.7 lbs. (20.3 kg.) less motor
- Min Fluid Temperature: -40°F (-40°C)
- Fluid pH Range: 0-14
- Approximate Weight: 44.7 lbs. (20.3 kg.) less motor
- Bearing Type: Internal Sleeve
- Magnet: Neodymium Encapsulated Virgin ETFE
- Solution Description: Transfer or Metering (Dosing)
- Turndown Ratio: SEE FLOW CURVES
- Casing Housings: PVDF
- Max Speed: 1750 rpm
- Theoretical Displacement: 2.135 US gal/100 rev. (80.82 cc/rev.)
- Drive Shaft Diameter: 1.000"
- Min System Pressure: .1mm Hg (abs)
- Max Allowable Working Pressure: up to 200 psig (14 bar)
- Motors: 1750 RPM, 60 Hz (1450 RPM, 50 Hz)
- Motor Power: 7.5 but is influenced by operating differential pressure and fluid viscosity
- Motor Frame: NEMA: 143/145TC - 182/4C, 182/184TC, 213/215 TCIEC: 100/112 B14 Face
- Seat O-Rings Available: FKM
- Drive Idler Gears: Carbon Reinforced PTFE/External Spur Gear
- Shafts: Alumina Ceramic
- HP Required: 7.5 but is influenced by operating differential pressure and fluid viscosity
- Pump Controls Links: MPCv
- Bearings: Graphite-Impregnated Silicon-Carbide
- Port Size and Type: 1.5 inch ANSI 150#/ DIN 32/40 Flanged
- Bearing Lubrication: Process fluid
- Max Differential Pressure: 100 psi (6.89 bar)
- Product Options: Bearing Flush
BROCHURES
Eclipse Brochure
FLOW CURVES
Eclipse Series Flow Curves 02-125
TECH SHEETS
Eclipse HYPOpump Data Sheet
Eclipse Non-metallic Value
Metering with Gear Pumps
IOMS
Eclipse IOM
Features
- All wetted components are completely non-metallic, not lined
- Pump housings and gears are made of engineered composites, magnetically driven, and require no mechanical seals
- Zero leakage, no emissions of hazardous or regulated chemicals
- Fewer parts and material options means simplified ordering and inventory
- Front pull-out design - makes for easy service and maintenance in place
- Pre-defined KOPkits® allow for easy ordering and kitting of all necessary parts to bring the pump back to factory performance
- Engineered composite fluoropolymer provide superior chemical resistance, lighter weight, shorter lead-times
- Pump is bidirectional-can be operated in either direction
- Modular design allows for the pump ports to be mounted in 45° increments (to a full 360°, vertical, horizontal, or any configuration imaginable)